Wall & Floor Forms ..........

Wall & Floor Forms :
Used for casting of floor slabs, RCC columns, beams and walls. Though available in a few standard sizes these are largely tailor-made. Precision manufactured with emphasis on squares ness. They give excellent concrete finish and cut costs and time involved in uses of timber.

Wall Forms :
The standard wall form system of steel shuttering comprises of steel panels manufactured out of 2.5 mm (12 swg.) thick skin plate and 45 x 45 x 5 mm punched angles that are jig assembled to ensure complete interchangeability. It offers maximum economy due to infinite reusability and is therefore universally used to cast RCC columns, beams, walls, culverts, docks and precast units.

Internal Corner Wall Forms are formed by means of standard 150 x 150 mm, 225 x 225 mm or 300 x 300 mm wide 900 internal corner wall forms, which are supplied in 1250, or 2500 mm lengths. Used in conjunction with standard 300 mm, 450 mm and 600 mm wide wall forms. Other width and length dimensions for can be tailor-made according to the requirements of the job. Consult us to get the most optimal configuration.

Splayed Internal and External Corner Wall Forms are tailor-made to obtain angles other than 900 Odd dimensioned closures, step-up and filter Make-up wall forms can also be supplied. Consult us to get the most optimal configuration.

Floor Forms :
Floor Forms commonly known as Centering Plates, are manufactured out of 2mm (14 swg.) sheets with pressed flanges and stiffeners that maintain edges even after considerable number of uses. The corners are reinforced to further extend the life of the forms.

Standard Floor Forms are made in 600 mm widths and 1150 and 900 mm lengths. They can also be manufactured in thickness of 2.5 mm (12 swg.) and 10 mm (10 swg.) for use in bridges and industrial Complexes.

Adjuster Forms or Fillers fill up odd shapes and sizes created on the fringes. These are available in 1150 x 300 and 900 x 300 mm sizes.

Technical Information : 

Floor Form Loading Data